4 × 3 m bedroom at 2.5 m height (2 coats)
Walls only, 1 door and 1 window, 10 m²/L coverage and 0% waste.
Walls = 35 m² − 3.25 m² openings = 31.75 m² × 2 coats = 63.5 m² ÷ 10 m²/L
Result: 6.35 L of paint (2 cans of 4 L).
Estimate gallons or liters of paint for walls and ceilings, subtracting doors and windows and rounding up by container size.
Enter your dimensions to see instant results.
No saved calculations in this browser yet.
Whether you need a wall paint calculator for a single room, a ceiling paint calculator, or a full room paint calculator, this tool estimates how much paint you need before you buy.
Walls = 2 × (Length + Width) × HeightNet area = Walls + Ceiling − OpeningsPaint = (Net area × Coats / Coverage) × (1 + Waste / 100)Containers = ceil(Paint / Container_size)Room perimeter is multiplied by wall height to get gross wall area. If ceiling is checked, Length × Width is added.
Standard opening deductions (20 ft² / 1.85 m² per door and 15 ft² / 1.40 m² per window) are subtracted.
Net area is multiplied by the number of coats and divided by single-coat coverage.
Waste allowance is applied and the total is rounded up to whole cans or pails.
Walls only, 1 door and 1 window, 10 m²/L coverage and 0% waste.
Walls = 35 m² − 3.25 m² openings = 31.75 m² × 2 coats = 63.5 m² ÷ 10 m²/L
Result: 6.35 L of paint (2 cans of 4 L).
Direct area mode, 1 coat, no openings, 0% waste.
400 ft² ÷ 350 ft²/gal = 1.143 gal
Result: 1.143 gal of paint (2 cans of 1 gal).
Standard interior latex paint typically covers 350 to 400 ft² per gallon per coat on smooth, primed drywall. Textured or porous surfaces may drop to 250–300 ft²/gal.
Two coats are standard for even color. Going from a dark color to a light one, or painting bare drywall without primer, may require 3 coats.
Only if you are using the exact same paint for both walls and ceiling. If the ceiling uses flat white ceiling paint, calculate it separately in area mode.
Because paint is sold in fixed cans or pails. Rounding up ensures you have enough to finish the final wall.
Leave both fields at 0. Keeping them at 0 gives you a small buffer for trim and future touch-ups.
For rectangular walls of different heights, calculate width × height for each wall individually and add the areas together. For sloped ceilings, measure and calculate the actual sloped surface area rather than using a single vertical height as if it were rectangular, then enter the total sum in «By total surface area» mode. Standard 10 L containers are a common size you can use as a reference when planning your purchase. Keep in mind the result is an estimate and actual coverage depends on the product, surface, and coats applied.