Concrete calculator

Use this concrete calculator to estimate cubic yards (yd³), cubic meters (m³), and premixed bags for rectangular slabs, footings, and cylindrical columns—with waste allowance and step-by-step math.

Unit system
Shape

Count of identical pieces (e.g. 4 equal columns).

Extra margin for cuts, spills and surprises. 5–10% is typical.

Results

Enter your dimensions to see instant results.

Recent calculations

No saved calculations in this browser yet.

Advertisement

What this concrete calculator is for and how to use it

Whether you need a concrete slab calculator for a patio or driveway, or a concrete yard calculator to order ready-mix delivery, this tool computes exact volume in cubic yards (yd³), cubic feet (ft³), and cubic meters (m³) before you buy.

How to use it step by step

  1. Choose your unit system: Imperial (feet and inches, outputting yd³ and ft³) or Metric (meters and centimeters, outputting m³).
  2. Select the element shape: Rectangular slab or footing, or Cylindrical column or pier.
  3. Enter the dimensions (length, width, and thickness for slabs; diameter and height for columns) plus the quantity of identical elements.
  4. Set a waste allowance percentage (5%–10% is standard for formed slabs; 10%–15% for uneven subgrades or footings).
  5. Optionally choose a premixed bag size (40 lb, 60 lb, 80 lb, 25 kg, or 50 kg) to see the rounded-up bag count.

Formula, units, and waste calculation

Units and conversions: in Imperial mode, thickness is entered in inches and divided by 12 to convert to feet; cubic feet are divided by 27 to get cubic yards (1 yd³ = 27 ft³). In Metric mode, thickness or diameter in centimeters is divided by 100 to convert to meters.

For cylindrical columns or piers, the circular cross-section area π × r² is multiplied by height and quantity.

Material waste: adding 5%–10% waste compensates for uneven subgrades, formwork deflection, compaction, and concrete left in wheelbarrows or pump lines.

Premixed bags divide total volume by standard manufacturer yield (for example, ~0.60 ft³ per 80 lb bag, ~0.45 ft³ per 60 lb bag, or ~0.022 m³ per 50 kg bag), rounded up to whole bags.

How to interpret the results

Practical examples

10 × 10 ft slab at 4 in thick

A standard 10 ft by 10 ft patio slab, 4 inches (0.333 ft) thick, with 10% waste.

10 × 10 × (4/12) = 33.33 ft³ (1.235 yd³) → × 1.10 = 1.358 yd³

Result: 1.358 yd³ total (or 62 bags of 80 lb).

5 × 4 m slab at 10 cm thick

A 5 m × 4 m slab, 10 cm (0.10 m) thick, with 10% waste.

5 × 4 × 0.10 = 2.00 m³ net → 2.00 × 1.10 = 2.20 m³ total

Result: 2.20 m³ of concrete (or 100 bags of 50 kg).

Frequently asked questions

How much concrete do I need for a 10 m² slab?

At 10 cm (0.10 m) thickness, a 10 m² slab needs 1.00 m³ net (1.10 m³ with 10% waste). At 12 cm thickness, it needs 1.20 m³ net (1.32 m³ with 10% waste).

How many 80 lb bags are in a cubic yard of concrete?

One 80 lb premixed bag yields about 0.60 ft³, so 1 cubic yard (27 ft³) requires approximately 45 bags of 80 lb.

What waste percentage should I add?

For formed slabs on a level base, 5%–10% is usually enough. For rough ground excavations or irregular footings, use 10%–15%.

Does this work for mortar or pure cement bags?

Volume (yd³ / m³) applies to any pour, but the bag count assumes premixed concrete bags (with aggregate included), not pure Portland cement.

Do I need to convert inches to feet manually?

No. In imperial mode, thickness is entered directly in inches (in) and converted to feet automatically.

What concrete thickness should I use?

There is no universal thickness: it depends on the intended use, ground conditions, loads, and project design. Generic measurements should not be treated as standards or structural recommendations. Always consult a qualified professional for structural elements.